Enable Cli-Config-Logging - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

enable cli-config-logging

enable cli-config-logging
Description
Enables the logging of CLI configuration commands to the Syslog for auditing.
Syntax Description
This command has no arguments or variables.
Default
Enabled
Usage Guidelines
ExtremeWare allows you to record all configuration changes and their sources that are made using the
CLI by way of Telnet or the local console. The changes are logged to the system log. Each log entry
includes the user account name that performed the changes and the source IP address of the client (if
Telnet was used). Configuration logging applies only to commands that result in a configuration
change.
To view the status of configuration logging on the switch, use the command. The
show management
command displays information about the switch including the enable/disable state
show management
for configuration logging.
Example
The following command enables the logging of CLI configuration commands to the Syslog:
enable cli-config-logging
History
This command was first available in ExtremeWare 6.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
746 ExtremeWare 7.5 Command Reference Guide