Unconfigure Netlogin Mac Auth-Retry-Count - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Security Commands

unconfigure netlogin mac auth-retry-count

Returns the reauthentication retry count to the default value of 3.

Syntax Description

This command has no arguments or variables.

The default number of retries is three.

Usage Guidelines

When a new MAC address is detected on a port enabled for MAC-based network login, an

authentication message (RADIUS Access-Request message) is sent from the RADIUS client to the

RADIUS server for validation. By default, the RADIUS client tries again a maximum of three times if

the validation request fails. After the third retry, the authentication attempt times out. This command

returns the retry count to its default value.

To set the authentication retry count to a number besides 3, use the following command

configure netlogin mac auth-retry-count

The following command sets the retry count to its default value:

unconfigure netlogin mac auth-retry-count

This command was first available in ExtremeWare 740.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5