Configure Vlan Protocol - Extreme Networks ExtremeWare Command Reference Manual

VLAN Commands

configure vlan protocol

configure vlan <vlan name> protocol [<protocol_name> | any]
Description
Configures a VLAN to use a specific protocol filter.
Syntax Description
vlan name Specifies a VLAN name.
protocol_name Specifies a protocol filter name. This can be the name of a predefined protocol filter or one you
have defined. The following protocol filters are predefined:
• IP
• IPX
• NetBIOS
• DECNet
• IPX_8022
• IPX_SNAP
• AppleTalk
any Indicates that this VLAN should act as the default VLAN for its member ports.
Default
Protocol any
Usage Guidelines
If the keyword is specified, all packets that cannot be classified into another protocol-based VLAN
any
are assigned to this VLAN as the default for its member ports.
Use the
configure protocol
Example
The following command configures a VLAN named accounting as an IP protocol-based VLAN:
configure accounting protocol ip
History
This command was first available in ExtremeWare 1.0.
Platform Availability
This command is available on the "i" series platforms and on the Summit 400-48t.
382
command to define a custom protocol filter.
ExtremeWare 7.5 Command Reference Guide