Extreme Networks ExtremeWare Command Reference Manual page 376

VLAN Commands
History
This command was enhanced for multinetting and made available in ExtremeWare 7.3.0. In earlier
releases of ExtremeWare the secondary IP addresses must fall in the same subnet as the primary IP
address. With ExtremeWare 7.3.0, secondary IP addresses specify local subnets in the switch and must
be unique.
When a secondary IP address configuration of a pre-ExtremeWare 7.3.0 release is restored with an
ExtremeWare 7.3.0 image, the following syslog message will be logged:
<WARN:IPRT> Secondary IP Address <x.x.x.x>/32 will not be used.
Platform Availability
This command is available only on the "i" series platforms.
376 ExtremeWare 7.5 Command Reference Guide