Show Mirroring - Extreme Networks ExtremeWare Command Reference Manual

show mirroring

show mirroring
show mirroring
Description
Displays the port-mirroring configuration on the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A
Usage Guidelines
You must configure mirroring on the switch to display mirroring statistics. Use the
show mirroring
command to configure mirroring.
You can use this command to display mirroring statistics and determine if mirroring is enabled or
disabled on the switch.
To view the status of port-mirroring on the switch, use the command. The
show mirroring show
command displays information about the enable/disable state for port-mirroring.
mirroring
Example
The following command displays switch mirroring statistics:
show mirroring
Following is the output from this command:
Mirror port: 5 is up
port number 1 in all vlans
History
This command was first available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide 321