Configure Mac-Lockdown-Timeout Ports Aging-Time - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

configure mac-lockdown-timeout ports aging-time

configure mac-lockdown-timeout ports [<portlist> | all] aging-time
<seconds>
Description
This command configures the MAC address lockdown timeout value in seconds for the specified port
or group of ports or for all ports.
Syntax Description
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports.
On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8.
all Specifies all ports.
seconds Sets the length of the timeout value in seconds. Default is 15; range is 15 to 2,000,000.
Default
15 seconds
Usage Guidelines
This timer overrides the FDB aging time.
This command only sets the duration of the MAC address lockdown timer. To enable the lockdown
timer, use the enable mac-lockdown-timeout ports command.
Example
The following example sets a MAC address lockdown timeout duration of 300 seconds for ports 3, 4,
and 5.
configure mac-lockdown-timeout ports 3-5 aging-time 300
History
This command was first available in ExtremeWare 7.5.
Platform Availability
This command is available on all platforms.
864 ExtremeWare 7.5 Command Reference Guide