Extreme Networks ExtremeWare Command Reference Manual page 1087
Version 7.5
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2620 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
unconfigure vlan dhcp-address-range
History
This command has been modified so that clearing of the secondary or remote address ranges is possible
(through the addition of the parameter
). This enhanced command was made available in
start-addr
ExtremeWare 7.3.0. and ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
1087
Advertisement
Table of Contents
Related Manuals for Extreme Networks ExtremeWare
Related Products for Extreme Networks ExtremeWare
- Extreme Networks ExtremeWare XOS Command
- Extreme Networks ExtremeWare Enterprise Manager
- Extreme Networks EPICenter Guide
- Extreme Networks ExtremeXOS ScreenPlay
- Extreme Networks ExtremeWireless AP460i
- Extreme Networks ExtremeWireless AP460e
- Extreme Networks ExtremeSwitching Virtual Services Platform 4450GSX-DC
- Extreme Networks ExtremeSwitching 3600 Series
- Extreme Networks ExtremeSwitching ISW Series
- Extreme Networks ExtremeSwitching X440-G2-12t-10GE4
- Extreme Networks ExtremeSwitching X440-G2-12p-10GE4
- Extreme Networks ExtremeSwitching X440-G2-48t-10GE4
- Extreme Networks ExtremeSwitching X440-G2-12t8fx-GE4
- Extreme Networks ExtremeSwitching X450-G2-48t-10GE4
- Extreme Networks ExtremeSwitching X620-10x
- Extreme Networks ExtremeSwitching X460-G2-24p-10GE4