Security Commands
show enhanced-dos-protect
show enhanced-dos-protect [rate-limit | ipfdb] ports [<portlist> | all]
Description
Displays the status of the enhanced denial of service protection feature.
Syntax Description
rate-limit
Displays rate limiting configuration.
ipfdb
Displays IPFDB learning qualifier configuration.
portlist
Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots a nd
ports. On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5,
2:*, 2:5, 2:6-2:8.
all
Specifies all ports.
Default
N/A
Usage Guidelines
The output from this command displays status of the following enhanced denial of service protection
conditions:
• Enabled/Disabled
• Max. entries
• Current entries
• List of trusted/untrusted ports
• Rate limiting configuration
• Packet filtering statistics
Example
The following command shows global enhanced denial of service protection rate limit information:
show enhanced-dos-protect rate-limit
PortNum
Status
PktsDrop
--------------------------------------------------------------------------------------
----------------------------------------------------
4:4
Enabled
50
0
Enhanced DOS Protect Rate Limit Global
Global Status : Enabled
1038
Trusted
Proto
Threshold
Trusted
icmp
Configuration
Learn-Window
Drop-Prob
100
10
ExtremeWare 7.5 Command Reference Guide