Show Arp-Learning Vlan Ports - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

show arp-learning vlan ports

show arp-learning vlan <vlan name> ports <portlist>
Description
Displays the ARP-learning configuration for a port in the given vlan.
Syntax Description
vlan name Specifies the vlan to which the rule applies.
portlist Specifies the ports to which the rule applies.
Default
By default, ARP learning is enabled.
Usage Guidelines
The first column of the show output displays the configuration of the VLAN and port. The second
column of the output display the ARP learning configuration on that port.
Example
The following example displays the arp-learning configuration on the VLAN called vlan1:
* Summit400-48t:55 #show arp-learning vlan1 ports all
The command generates output similar to the following:
(Vlan,Port)-Arp Learning
--------------------------
[vlan1 ,3 ]-Enabled
History
This command was first available in ExtremeWare 7.3.0 and ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
1034
(Port)-Arp learning
------------------------
[3 ]-Enabled
ExtremeWare 7.5 Command Reference Guide