Extreme Networks ExtremeWare Command Reference Manual page 765
Version 7.5
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2620 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
enable temperature-logging
History
This command was first available in ExtremeWare 6.2.2b108.
This command was not supported in ExtremeWare 7.0.
The command was supported and the syntax changed from
in ExtremeWare
enable log temperature
7.1.0.
Platform Availability
This command is available on modular switches only.
ExtremeWare 7.5 Command Reference Guide
765
Advertisement
Table of Contents
Related Manuals for Extreme Networks ExtremeWare
Related Products for Extreme Networks ExtremeWare
- Extreme Networks ExtremeWare XOS Command
- Extreme Networks ExtremeWare Enterprise Manager
- Extreme Networks EPICenter Guide
- Extreme Networks ExtremeXOS ScreenPlay
- Extreme Networks ExtremeWireless AP460i
- Extreme Networks ExtremeWireless AP460e
- Extreme Networks ExtremeSwitching Virtual Services Platform 4450GSX-DC
- Extreme Networks ExtremeSwitching 3600 Series
- Extreme Networks ExtremeSwitching ISW Series
- Extreme Networks ExtremeSwitching X440-G2-12t-10GE4
- Extreme Networks ExtremeSwitching X440-G2-12p-10GE4
- Extreme Networks ExtremeSwitching X440-G2-48t-10GE4
- Extreme Networks ExtremeSwitching X440-G2-12t8fx-GE4
- Extreme Networks ExtremeSwitching X450-G2-48t-10GE4
- Extreme Networks ExtremeSwitching X620-10x
- Extreme Networks ExtremeSwitching X460-G2-24p-10GE4