Configure Vlan Add Secondary-Ip - Extreme Networks ExtremeWare Command Reference Manual

configure vlan add secondary-ip

configure vlan <vlan-name> add secondary-ip <sec-ip-address> {<sec-ip-mask>
| <mask-length>}
Description
Configures the secondary IP address for the selected VLAN.
NOTE
This command is available only on the "i" series switches.
Syntax Description
vlan-name
add-secondary-ip
sec-ip-address
sec-ip-mask
mask-length
Default
N/A
Usage Guidelines
Use this command to configure a secondary IP address for the specified VLAN.
Secondary IP addresses specify a local subnet on the switch and must be unique.
Multinetting must have been globally enabled before a secondary IP address is configured for a VLAN.
You can configure a maximum of 64 secondary IP addresses.
A secondary IP address can be configured only if a primary IP address has been configured already for
the VLAN.
Secondary IP addresses cannot be modified. They must be deleted and added again. Use the following
command to delete a secondary IP address:
configure vlan delete secondary-ip
Example
The following command configures the secondary IP address for the VLAN named test1:
configure vlan test1 add secondary-ip 95.0.0.1/24
ExtremeWare 7.5 Command Reference Guide
Specifies the name of the VLAN to be configured.
Specifies that the secondary IP address is to be configured.
Specifies the secondary IP address for the VLAN.
(Optional) Specifies the network mask.
(Optional) Specifies the network mask in bits.
configure vlan add secondary-ip
375