Disable Flow-Redirect - Extreme Networks ExtremeWare Command Reference Manual

disable flow-redirect

disable flow-redirect [all | <flow redirect>]
Description
Disables flow redirection.
Syntax Description
all
flow redirect
Default
The default parameter is all.
Flow redirection is disabled by default.
Usage Guidelines
When you create a new flow redirection policy, flow redirection is automatically enabled.
To enable flow redirection, use the following command:
enable flow-redirect
Example
The following command disables flow redirection for all flow policies:
disable flow-redirect all
History
This command was available in ExtremeWare 6.1.4.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies all flow policies.
Specifies a single flow redirection policy.
disable flow-redirect
579