Configure Msm-Failover Slave-Config - Extreme Networks ExtremeWare Command Reference Manual

configure msm-failover slave-config

configure msm-failover slave-config [inherited | flash]
Description
Configures the slave MSM-3 to inherit the software configuration from the master MSM-3.
Syntax Description
inherited Specifies that the slave MSM-3 inherits the software configuration maintained by the current master
MSM-3 (this supports hitless failover).
flash Specifies that the slave MSM-3 use the configuration stored in its flash memory (this is the default
and does not support hitless failover).
Default
Flash
Usage Guidelines
If you enter the
msm-failover link-action
Example
The following command configures the slave MSM-3 to inherit the software configuration from the
current master MSM-3:
configure msm-failover slave-config inherited
History
This command was first available in ExtremeWare 7.1.1.
Platform Availability
This command is available on the BlackDiamond switch only.
ExtremeWare 7.5 Command Reference Guide
keyword, you cannot use the
flash
command.
option of the
preserve-state
configure msm-failover slave-config
configure
263