Configure Security-Profile Dot1X-Wpa-Timers Group-Update-Timer - Extreme Networks ExtremeWare Command Reference Manual

configure security-profile dot1x-wpa-timers
group-update-timer
configure security-profile <name> dot1x-wpa-timers group-update-timer
<minutes>
Description
When the network-authentication is set to dot1x, WPA or WPA2, this command configures the interval
when group keys for dot1x and WPA clients are updated.
Syntax Description
name
minutes
Default
10 minutes
Usage Guidelines
Use this command to change WPA and dot1x key update time values. Change timers only when you do
not want the keys to be updated frequently.
Example
The following command sets the interval for updating keys to 29 minutes in the security profile called
open-profile:
configure security-profile open-profile dot1x-wpa-timers group-update-timer 29
History
This command was first available in ExtremeWare 6.2a. It was added to the "e" series in 7.3e and to the
"i" series in 7.3.0.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine 3800
switches.
ExtremeWare 7.5 Command Reference Guide
Specifies the name of the security profile.
Specifies the interval in minutes. Valid values are between 10 and 1440 The default value is
10 minutes.

configure security-profile dot1x-wpa-timers group-update-timer

895