Extreme Networks ExtremeWare Command Reference Manual page 1110

Hide thumbs Also See for ExtremeWare:

Table of Contents

Configuration and Image Commands

save configuration slot 4 primary

This command was available in ExtremeWare 2.0.

This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.

This command was modified in ExtremeWare 7.4 to support stacking.

Support for the

keywords was added in ExtremeWare 7.4.

Platform Availability

This command is available on all platforms. The

parameters are only supported

on the Summit 200, Summit 300-24, and Summit 400 switches for stacking.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5