Extreme Networks ExtremeWare Command Reference Manual page 1045

Quiet Period
Client Response Timeout
Default Reauthentication Timeout
Max. Number Authentication Failure
Periodic Reauthentication
---------------------------------
Port: 1:13,
MAC
00:B0:D0:90:2F:72
-------------------------------
Total Number of Authenticated MACs : 0
The following command shows the detailed network login information for the port 1:13 in the VLAN
named Default:
show netlogin ports 1:13 "Default"
Following is the output from this command before authentication:
Port: 1:13
Port State:
DHCP:
MAC
------------------------------------------------------------------
00:B0:D0:90:2F:72
Quiet Period Timer
------------------------------------------------------------------
Following is the output from this same command after authentication:
Port: 1:13
Port State:
DHCP:
MAC
------------------------------------------------------------------
00:B0:D0:90:2F:72
Quiet Period Timer
------------------------------------------------------------------
History
This command was first available in ExtremeWare 6.2.
This command was modified to show the authentication type in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Vlan: Default, State: Unauthenticated
IP address
0.0.0.0
Vlan: Default
Unauthenticated
Not Enabled
IP address Auth
0.0.0.0 No
: 0
Vlan: Default
Unauthenticated
Not Enabled
IP address Auth
0.0.0.0 Yes
: 0
IP address
: 60 secs
: 30 secs
: 3600 secs
: 3
: ENABLED
Auth Type ReAuth-Timer User
No 802.1x 12
Type ReAuth-Timer User
802.1x 30
Num. Authentication Failed
Type ReAuth-Timer User
802.1x 3600
Num. Authentication Failed
Auth Type
Unknown
Unknown
: 1
auto20@dot1x.net
: 0
User ReAuth-Timer
show netlogin
1045