Configure Slb Gogo-Mode Service-Check Timer - Extreme Networks ExtremeWare Command Reference Manual

configure slb gogo-mode service-check timer

configure slb gogo-mode <port number> service-check timer [all | ftp | http
| telnet | smtp | nntp | pop3 | <TCP port number>] frequency <seconds>
timeout <seconds>
Description
Overrides the global frequency and timeout values for the service check.
Syntax Description
port number
all
ftp
http
telnet
smtp
nntp
pop3
TCP port number
frequency
timeout
Default
The default frequency is 60 seconds.
The default timeout is 180 seconds.
Usage Guidelines
You can use this command at any time. This command affects the frequency and timeout for the
specified service check in the specified GoGo mode group.
The frequency must be less than the timeout.
Example
The following command configures GoGo mode FTP service check for the group with port 29 as the
master port with a frequency of 15 seconds and a timeout of 45 seconds:
configure slb gogo-mode 29 service-check timer ftp frequency 15 timeout 45
History
This command was first available in ExtremeWare 6.1.5.
ExtremeWare 7.5 Command Reference Guide
Specifies the GoGo mode master port.
Specifies all service checks.
Specifies the FTP service check.
Specifies the HTTP service check.
Specifies the telnet service check.
Specifies the SMTP service check.
Specifies the NNTP service check.
Specifies the POP3 service check.
Specifies a TCP port, instead of a service, for the service check.
Specifies the frequency of the service check. The range is 15 to 300 seconds.
Specifies the timeout of the service check. The range is 15 to 300 seconds.
configure slb gogo-mode service-check timer
537