Show Packet-Mem-Scan-Recovery-Mode - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

show packet-mem-scan-recovery-mode

show packet-mem-scan-recovery-mode
Description
Displays the recovery mode setting for slot's that have packet memory scanning enabled.
NOTE
This command is available only on the BlackDiamond switches.
Syntax Description
This command has no arguments or variables.
Default
N/A
Usage Guidelines
The command displays the following information:
show packet-mem-scan-recovery-mode
• Global settings for the system health check
• Auto-recovery settings for slots that have packet memory scanning enabled
Example
The following command displays the settings for each slot that has packet memory scanning enabled:
show packet-mem-scan-recovery-mode
The following is sample output from this command:
Global sys-health-check 'online' setting is ONLINE
slot 3: AUTORECOVERY MODE is OFFLINE
MSM-B: AUTORECOVERY MODE is ONLINE
# NOTE Global setting is always online for sys-health-check alarm-level
configurations.
It is only offline when "sys-health-check auto-recovery <#> offline" is
configured.
History
This command was first available in ExtremeWare 6.2.2b108.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
792 ExtremeWare 7.5 Command Reference Guide