Extreme Networks ExtremeWare Command Reference Manual page 890

Security Commands
add | delete <med_number>
local-preference <number>
weight <number>
origin [igp | egp | incomplete]
tag <tag_number>
accounting index
<index_number>
value <value_number>
cost <number>
cost-type <number>
Default
N/A
Usage Guidelines
None
Example
The following command deletes the
setting a MED value of 200:
configure bgp-out 15 delete set med 200
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available only on the "i" series platforms.
890
Specifies add or delete of the specified value to or from the MED.
Specifies a local preference number.
Specifies a weight associated with the NLRI.
Specifies the origin.
Specifies the tag in the route to the specified number.
Specifies the index number of an accounting index to be set.
Specifies a value for the accounting index.
Specifies the cost of the route.
Specifies the cost type.
statement from entry 15 of route table bgp-out that specified
set
ExtremeWare 7.5 Command Reference Guide