Show Ports Vlan Info - Extreme Networks ExtremeWare Command Reference Manual

show ports vlan info

show ports <portlist> | vlan <vlan_name> vlan info
Description
Displays port VLAN information.
Syntax Description
portlist
vlan_name
Default
N/A
Usage Guidelines
None
Example
The following command displays VLAN information for port 2:
show ports 2 vlan info
The following is the output from this command:
Port 2
Name
v1
#
#
Flags: (C) Domain-masterVlan, (c) Domain-memberVlan, (d) DVMRP Enabled
(E) ESRP Slave, (f) IP Forwarding Enabled, (G) GVRP Enabled
(i) ISIS Enabled, (I) IP Forwarding lpm-routing Enabled
(L) Loopback Enabled, (M) ESRP Master, (m) IPmc Forwarding Enabled
(N) GNS Reply Enabled, (o) OSPF Enabled (P) IPX SAP Enabled
(p) PIM Enabled, (R) SubVLAN IP Range Configured, (r) RIP Enabled
(S) SuperVlan, (s) SubVlan, (T) Member of STP Domain
(v) VRRP Enabled, (V) VPLS/TLS Enabled, (X) IPX RIP Enabled
(Z) Translation-Vlan, (z) Member-Vlan
(2) IPX Type 20 Forwarding Enabled
History
This command was first available in ExtremeWare 7.3.0 and ExtremeWare 7.3e.
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the
form 1, 2, 3-5, 1:*, 1:5, 1:6-1:8.
Specifies to display VLAN information from the VLAN with this name.
VID Protocol Addr
4093 ------------------ --------
Flags Proto
ANY
show ports vlan info
Ports
2/2
341