Dcn Physical Interface Page - Ip Address - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
Figure 3-38 DCN Physical Interface page - IP address
The NE Generic Configuration tab displays the IP Address Management panel that
contains the following parameters:
MAC ADDRESS (Medium Access Control address) - This is the MAC address
•
assigned to the card. Note that this parameter can only be read and cannot be modified.
NAME - This is the entry box for the TCP/IP network name of the NE. This value is
•
not used by the NE in any way at this time, but it may be set so that verification of the
IP address can be made at a later time.
IP Address (Internet Protocol address) - This is the IP address of the NE. The entry
•
box allows to enter the IP address of the NE (value range [1-99, 101-126,128-223] -
[0-255] - [0-255] - [0-254]).
Subnet Mask - This is the entry box for subnet mask of the network the NE is
•
connected to (value range [128-255] - [0-255] - [0-255] - [0-255]). The mask, in
binary representation, must contain a contiguous string of 1s (the network portion) and
a contiguous string of 0s (the host portion).
The Save hyperlink saves and closes the page.
LAN manag
This option allows the operator to modify the various network interface parameters
associated with the customer LAN.
Select Xcom -> DCN Phys. If -> LAN manag. option as shown in
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
Xcom menu
Figure 3-39.
3 - 4 5