S
T
C
PANNING
REE
OMMANDS
-
-
SPANNING
TREE TRANSMIT
HOLDCOUNT
spanning-tree transmit-holdcount
Overview
Use this command to set the maximum number of BPDU transmissions that are
held back.
Use the no variant of this command to restore the default transmit hold-count
value.
Syntax
spanning-tree transmit-holdcount
no spanning-tree transmit-holdcount
Default
Transmit hold-count default is 3.
Mode
Global Configuration
awplus#
Example
awplus(config)#
C613-50102-01 REV C
configure terminal
spanning-tree transmit-holdcount
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
617