If Dtc Is Displayed Without Dtc Check Procedure, Perform Following Trouble-Shooting - Toyota T100 1996 Service Manual

If DTC is displayed without DTC check procedure, perform following trouble-
shooting:
1 Check resistance between terminal Tc of center airbag sensor assembly and
body ground.
Airbag Sensor Assembly
OK
Replace center airbag sensor assembly.
1996 TOYOTA T100 (RM449U)
DIAGNOSTICS − SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATION:
(a) Turn ignition switch to LOCK.
(b) Disconnect negative (−) terminal cable from the battery,
and wait at least 90 seconds.
(c) Disconnect center airbag sensor assembly connector.
CHECK:
Check resistance between terminal Tc of center airbag sensor
assembly connector and body ground.
OK:
R14303
Resistance: 1MΩ or Higher
NG Repair or replace harness or connector.
DI−407