Show Virtual-Chassis Device-Topology; Table 168: Show Virtual-Chassis Device-Topology Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show virtual-chassis device-topology

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Output Fields

Table 168: show virtual-chassis device-topology Output Fields

Field Name Field Description
Assigned member ID.
Member
Assigned device ID.
Device
For an EX8200 Virtual Chassis, the member ID and the device ID are always
identical.
The status of the device within the Virtual Chassis. Outputs include:
Status
Prsnt
configuration.
NotPrsnt
System ID System ID of the device.
The system ID of the device is the device's MAC address.
1134
®
OS for EX Series Ethernet Switches, Release 10.4
show virtual-chassis device-topology
<all-members>
<local>
<member member-id>
Command introduced in Junos OS Release 10.4 for EX Series switches.
Display the device topology—the member and system IDs, the VCP numbers, and device
status—for all hardware devices in the Virtual Chassis.
—Display the Virtual Chassis device topology for all members of the Virtual Chassis.
none
—(Optional) Display the Virtual Chassis device topology for all members of
all-members
the Virtual Chassis.
—(Optional) Display the Virtual Chassis device topology for the switch or external
local
Routing Engine on which this command is entered.
member member-id —(Optional) Display the Virtual Chassis device topology for the
specified member of the Virtual Chassis.
clear
Understanding EX4200 Virtual Chassis Link Aggregation on page 902
Understanding EX8200 Virtual Chassis Topologies on page 1074
Table 168 on page 1134 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.
—Device is currently connected to and participating in the Virtual Chassis
—Device is assigned but is not currently connected.
show virtual-chassis device-topology
Copyright © 2010, Juniper Networks, Inc.