Monitoring Gvrp - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Table 197: Ethernet Switching Output Fields (continued)
Field
VLAN
MAC Address
Type
Age
Interfaces
MAC Learning Log
VLAN-Name
MAC Address
Time
State
Related
Documentation

Monitoring GVRP

Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
Value
The VLAN name.
The MAC address associated with the VLAN. If a VLAN range has been configured for a
VLAN, the output displays the MAC addresses for the entire series of VLANs that were
created with that name.
The type of MAC address. Values are:
—The MAC address is manually created.
static
—The MAC address is learned dynamically from a packet's source MAC address.
learn
flood —The MAC address is unknown and flooded to all members.
The time remaining before the entry ages out and is removed from the Ethernet switching
table.
The associated interfaces.
The VLAN name.
The learned MAC address associated with the VLAN ID.
Timestamp for the time at which when the MAC address was added or deleted from the
MAC learning log.
Operating state of the interface. Values are
Configuring MAC Table Aging (CLI Procedure) on page 1381
Understanding Bridging and VLANs on EX Series Switches on page 1283
Use the monitoring feature to view information about the GVRP configuration on the EX
Series switch.
To monitor GVRP in the J-Web interface, select
To monitor GVRP in the CLI, enter the following command:
show gvrp
Table 198 on page 1404 summarizes the GVRP output fields.
Chapter 60: Verifying Bridging and VLAN Configuration
and .
Up Down
Monitor > Switching > GVRP .
1403