Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1194

Complete Software Guide for Junos
Preprovisioning the Virtual Chassis
CLI Quick
Configuration
Step-by-Step
Procedure
Results
1090
®
OS for EX Series Ethernet Switches, Release 10.4
To preprovision the Virtual Chassis:
To quickly preprovision the Virtual Chassis, log onto the master external Routing Engine
and enter the following commands:
[edit]
set virtual-chassis preprovisioned
set virtual-chassis member 0 serial-number ghi789 role line-card
set virtual-chassis member 1 serial-number jkl112 role line-card
set virtual-chassis member 8 serial-number abc123 role routing-engine
set virtual-chassis member 9 serial-number def456 role routing-engine
To preprovision the EX8200 Virtual Chassis:
Log in to the master external Routing Engine and specify the use of a preprovisioned
1.
configuration:
NOTE: You must use a preprovisioned configuration to configure an
EX8200 Virtual Chassis. Nonprovisioned configuration is not supported.
[edit virtual-chassis]
user@external-routing-engine# set preprovisioned
Specify all members that you want to include in the Virtual Chassis configuration,
2.
listing each switch's or external Routing Engine's serial number with the desired
member ID and role:
[edit virtual-chassis]
user@external-routing-engine# set member 0 serial-number ghi789 role line-card
user@external-routing-engine# set member 1 serial-number jkl112 role line-card
user@external-routing-engine# set member 8 serial-number abc123 role
routing-engine
user@external-routing-engine# set member 9 serial-number def456 role
routing-engine
Check the results of the configuration:
[edit virtual-chassis]
user@external-routing-engine# show
preprovisioned;
member 0 {
role line-card;
serial-number ghi789;
}
member 1 {
role line-card;
serial-number jkl112;
}
member 8 {
role routing-engine;
serial-number abc123;
}
Copyright © 2010, Juniper Networks, Inc.