Serial-Number - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

serial-number

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1114
®
OS for EX Series Ethernet Switches, Release 10.4
serial-number serial-number;
[edit virtual-chassis preprovisioned member member-id]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
In a preprovisioned EX4200 Virtual Chassis configuration, specify the serial number of
each EX4200 member switch to be included in the Virtual Chassis configuration. If you
do not include the serial number within the Virtual Chassis configuration, the switch
cannot be recognized as a member of a preprovisioned configuration.
In an EX8200 Virtual Chassis configuration, specify the serial number of each XRE200
External Routing Engine and each EX8200 member switch to be included in the Virtual
Chassis configuration. If you do not include the serial number within the Virtual Chassis
configuration, the external Routing Engine or switch cannot be recognized as a member
of the configuration.
—Permanent serial number for the external Routing Engine or switch.
serial-number
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Example: Configuring an EX4200 Virtual Chassis Using a Preprovisioned Configuration
File on page 952
Example: Setting Up a Full Mesh EX8200 Virtual Chassis with Two EX8200 Switches
and Redundant XRE200 External Routing Engines on page 1087
Configuring an EX4200 Virtual Chassis (CLI Procedure) on page 981
Configuring an EX8200 Virtual Chassis (CLI Procedure) on page 1093
Configuring an EX4200 Virtual Chassis (J-Web Procedure) on page 985
Adding a New Switch to an Existing EX4200 Virtual Chassis (CLI Procedure) on page 986
Replacing a Member Switch of an EX4200 Virtual Chassis Configuration (CLI Procedure)
on page 991
Copyright © 2010, Juniper Networks, Inc.