Request Virtual-Chassis Reactivate - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

request virtual-chassis reactivate

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
request virtual-chassis request virtual-chassis
reactivate reactivate
1124
®
OS for EX Series Ethernet Switches, Release 10.4
request virtual-chassis reactivate
Command introduced in Junos OS Release 9.3 for EX Series switches.
Reactivate a device that has been assigned a member ID but is not currently connected
to the Virtual Chassis.
You can use this command to reactivate a device that was previously part of the Virtual
Chassis but whose status is no longer
system-control
Verifying the Member ID, Role, and Neighbor Member Connections of an EX4200 Virtual
Chassis Member on page 1010
Verifying the Member ID, Role, and Neighbor Member Connections of an EX8200 Virtual
Chassis Member on page 1103
request virtual-chassis reactivate on page 1124
user@switch> request virtual-chassis reactivate
.
Prsnt
Copyright © 2010, Juniper Networks, Inc.