Chassis (Cli Procedure) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Related
Documentation
1096
®
OS for EX Series Ethernet Switches, Release 10.4
Note and record the serial number of the new switch or external Routing Engine. See
4.
Locating the Serial Number on an EX8200 Switch or Component and Locating the
Serial Number on an XRE200 External Routing Engine or Component.
Log onto the master external Routing Engine on the Virtual Chassis.
5.
Delete the device that you uncabled from the Virtual Chassis configuration:
6.
[edit virtual-chassis]
user@external-routing-engine# delete member member-id serial-number
serial-number role role
For example:
To delete a switch from the Virtual Chassis configuration:
[edit virtual-chassis]
user@external-routing-engine# delete member 1 serial-number abc123 role line-card
To delete an external Routing Engine from the Virtual Chassis configuration:
[edit virtual-chassis]
user@external-routing-engine# delete member 8 serial-number yza567 role
routing-engine
Add the new device to the Virtual Chassis configuration:
7.
[edit virtual-chassis]
user@external-routing-engine# set member member-id serial-number serial-number
role role
For example:
To add a switch to the Virtual Chassis configuration:
[edit virtual-chassis]
user@external-routing-engine# set member 1 serial-number lmn910 role line-card
To add an external Routing Engine to the Virtual Chassis configuration:
[edit virtual-chassis]
user@external-routing-engine# set member 8 serial-number opq112 role
routing-engine
Commit the configuration:
8.
[edit]
user@external-routing-engine# commit synchronize
Connect the new device to the EX8200 Virtual Chassis. See Connecting an EX8200
9.
Switch to an XRE200 External Routing Engine.
Configuring an EX8200 Virtual Chassis (CLI Procedure) on page 1093
Verifying the Member ID, Role, and Neighbor Member Connections of an EX8200 Virtual
Chassis Member on page 1103
Copyright © 2010, Juniper Networks, Inc.