Virtual-Chassis - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

virtual-chassis

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
virtual-chassis {
auto-sw-update {
package-name package-name;
}
fast-failover (ge | vcp disable | xe);
id id;
mac-persistence-timer seconds;
member member-id {
mastership-priority number;
no-management-vlan;
serial-number;
role;
}
no-split-detection;
preprovisioned;
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable> <match
regex>;
flag flag ;
}
}
[edit]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure Virtual Chassis information.
The remaining statements are explained separately.
A standalone EX4200 switch is a Virtual Chassis by default. It has a default member ID
of 0, a default mastership priority of 128, and a default role as master.
A standalone XRE200 External Routing Engine or EX8200 switch is not part of an EX8200
Virtual Chassis until a Virtual Chassis configuration is set up.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Example: Configuring an EX4200 Virtual Chassis with a Master and Backup in a Single
Wiring Closet on page 917
Example: Setting Up a Full Mesh EX8200 Virtual Chassis with Two EX8200 Switches
and Redundant XRE200 External Routing Engines on page 1087
Configuring an EX4200 Virtual Chassis (CLI Procedure) on page 981
Configuring an EX8200 Virtual Chassis (CLI Procedure) on page 1093
Configuring an EX4200 Virtual Chassis (J-Web Procedure) on page 985
Chapter 48: Configuration Statements for EX8200 Virtual Chassis
1117