Set Chassis Virtual-Chassis - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

set chassis virtual-chassis

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
set chassis set chassis
virtual-chassis virtual-chassis
1128
®
OS for EX Series Ethernet Switches, Release 10.4
set chassis virtual-chassis
<disable>
<local>
Command introduced in Junos OS Release 10.4 for EX Series switches.
Set the EX8200 switch into Virtual Chassis mode.
An EX8200 switch cannot be a member switch in an EX8200 Virtual Chassis until the
switch is in Virtual Chassis mode.
This command is not needed when configuring an EX4200 Virtual Chassis.
—Sets the entire switch—all internal Routing Engines (REs) or Switching Fabric and
none
Routing Engines (SREs)—into Virtual Chassis mode.
disable —Disable Virtual Chassis mode for all REs and SREs on the switch.
—Set the Routing Engine that you are currently logged in to into Virtual Chassis
local
mode.
view
set chassis virtual-chassis on page 1128
user@switch> set chassis virtual-chassis
This will reboot the RE(s)
Do you want to continue ? [yes,no] (no) yes
Copyright © 2010, Juniper Networks, Inc.