Request Virtual-Chassis Recycle - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

request virtual-chassis recycle

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
request virtual-chassis request virtual-chassis
recycle member-id 3 recycle member-id 3
request virtual-chassis request virtual-chassis
recycle member-id 1 recycle member-id 1
Copyright © 2010, Juniper Networks, Inc.
request virtual-chassis recycle member-id member-id
Command introduced in Junos OS Release 9.0 for EX Series switches.
Make a previously used member ID available for reassignment.
When you remove a member switch from the Virtual Chassis configuration, the master
reserves that member ID. To make the member ID available for reassignment, you must
use this command.
NOTE: You must run this command from the Virtual Chassis member in the
master role.
—Specify the member ID that you want to make available for
member-id member-id
reassignment to a different member.
system-control
request virtual-chassis renumber on page 1044
Replacing a Member Switch of an EX4200 Virtual Chassis Configuration (CLI Procedure)
on page 991
request virtual-chassis recycle member-id 3 on page 1125
request virtual-chassis recycle member-id 1 on page 1125
user@switch> request virtual-chassis recycle member-id 3
user@external-routing-engine> request virtual-chassis recycle member-id 1
Chapter 49: Operational Commands for EX8200 Virtual Chassis
1125