Show System Uptime; Table 166: Show System Uptime Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show system uptime

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 166: show system uptime Output Fields

Field Name
Current time
System booted
Protocols started
Last configured
Time and up
Users
Load averages
Copyright © 2010, Juniper Networks, Inc.
show system uptime (all-members | member member-id)
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the current time and information about how long the Virtual Chassis, Virtual
Chassis software, and routing protocols have been running.
—Display the current time and information about how long the Virtual Chassis,
all-members
Virtual Chassis software, and routing protocols have been running for all the member
switches of the Virtual Chassis configuration.
—Display the current time and information about how long the Virtual
member member-id
Chassis, Virtual Chassis software, and routing protocols have been running for the
specific member of the Virtual Chassis configuration.
view
virtual-chassis on page 1037
Monitoring System Properties on page 650
show system uptime member 0 on page 1130
Table 155 on page 1048 lists the output fields for the
fields are listed in the approximate order in which they appear.
Field Description
Current system time in UTC.
Date and time when the switch was last booted and how long it has been running.
Date and time when the routing protocols were last started and how long they have
been running.
Date and time when a configuration was last committed. Also shows the name of
the user who issued the last commit command.
Current time, in the local time zone, and how long the switch has been operational.
Number of users logged into the switch.
Load averages for the last 1 minute, 5 minutes, and 15 minutes.
Chapter 49: Operational Commands for EX8200 Virtual Chassis
show system uptime
command. Output
1129