Policy Action Shared - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

policy action shared

Enables queues created by a particular action to be shared.
policy action action_name shared
policy action action_name no shared
Syntax Definitions
action_name
Defaults
By default, queues created by an action are not shared.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
If multiple rules have the same action, more than one flow may be scheduled on the same queue if the
queue is defined as shared; otherwise, a separate queue is created for each flow.
•
Note that flows must be sent over the same virtual port for the flows to share a queue. For example,
flows with the same 802.1Q tag may share the same queue.
•
Use the no form of the command to disable sharing.
Example
-> policy action action5 shared
-> policy action action5 no shared
Release History
Release 6.6.1; command was introduced.
Related Commands
policy action
qos apply
show policy action
page 39-114
The name of the action.
Creates a policy action.
Applies configured QoS and policy settings to the current configuration.
Displays information about actions configured on the switch.
OmniSwitch CLI Reference Guide
QoS Policy Commands
November 2009