Table of Contents
Advertisement
Field
Selected Ports
Unselected Ports
Individual Ports
Share Type
display link-aggregation verbose
Use display link-aggregation verbose to display detailed information about the aggregation
groups that correspond to the specified aggregate interfaces.
Syntax
display link-aggregation verbose [ bridge-aggregation [ interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
bridge-aggregation: Specifies Layer 2 aggregate interfaces.
interface-number: Specifies an existing aggregate interface by its number.
Usage guidelines
If you specify the bridge-aggregation keyword but do not specify an interface number, the
command displays detailed information about all Layer 2 aggregation groups.
If you do not specify an aggregate interface type, the command displays detailed information about
all aggregation groups.
The bridge-aggregation keyword is available only when Layer 2 aggregate interfaces exist on the
device.
Examples
# Display detailed information about Layer 2 aggregation group 10, which is a dynamic aggregation
group.
<Sysname> display link-aggregation verbose bridge-aggregation 10
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected, I -- Individual
Flags:
A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Bridge-Aggregation10
Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: 0x8000, 000f-e267-6c6a
Local:
Port
Description
Total number of Selected ports.
Total number of Unselected ports.
Total number of Individual ports.
Load sharing type.
Status
Priority Oper-Key
89
Flag
Advertisement
Table of Contents
