Table 17 Command output
Field
Aggregation Interface Type
Loadsharing Type
AGG Interface
Select Ports
Unselect Ports
Share Type
display link-aggregation verbose
Use display link-aggregation verbose to display detailed information about the aggregation groups
corresponding to the aggregate interfaces.
Syntax
display link-aggregation verbose [ bridge-aggregation [ interface-number ] ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
bridge-aggregation: Displays detailed information about the Layer 2 aggregation groups corresponding
to Layer 2 aggregate interfaces.
interface-number: Specifies an existing Layer 2 aggregate interface by its number. The value range
varies by device model. For more information, see About the Command References for HP Unified
Wired-WLAN Products.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you specify the bridge-aggregation interface-number option, the command displays information about
the specified Layer 2 aggregation group.
If you specify the bridge-aggregation keyword and do not specify the interface-number argument, the
command displays information about all Layer 2 aggregation groups.
Description
Aggregate interface type: BAGG (Layer 2 aggregate interface).
Load sharing type:
•
Shar—Load sharing.
•
NonS—Non-load sharing.
Type and number of the aggregate interface.
Total number of Selected ports.
Total number of Unselected ports.
Load sharing type.
75