Port Monitor-Link Group - HP 6125G Command Reference Manual

uplink: Specifies an uplink port.
downlink: Specifies a downlink port.
Description
Use port to assign a port to the monitor link group.
Use undo port to remove a port from the monitor link group.
You can assign Layer 2 Ethernet ports or Layer 2 aggregate interfaces to a monitor link group as member
ports.
A port can be assigned to only one monitor link group.
Alternatively, you can assign a port to a monitor link group by using the port monitor-link group
command in Layer 2 Ethernet interface view or Layer 2 aggregate interface view.
Related commands: port monitor-link group.
Examples
# Create monitor link group 1, and configure GigabitEthernet 1/0/1 as an uplink port and
GigabitEthernet 1/0/2 as a downlink port for monitor link group 1.
<Sysname> system-view
[Sysname] monitor-link group 1
[Sysname-mtlk-group1] port gigabitethernet 1/0/1 uplink
[Sysname-mtlk-group1] port gigabitethernet 1/0/2 downlink

port monitor-link group

Syntax
port monitor-link group group-id { uplink | downlink }
undo port monitor-link group group-id
View
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
group-id: Monitor link group ID, which ranges from 1 to 16.
uplink: Specifies an uplink port.
downlink: Specifies a downlink port.
Description
Use port monitor-link group to assign the current port to a monitor link group as a member port.
Use undo port monitor-link group to remove the current port from a monitor link group.
A port can be assigned to only one monitor link group.
Alternatively, you can assign a port to a monitor link group with the port command in monitor link group
view.
Related commands: port.
87