Enable Sae On The Instrument And Specify The Sae Server (Administrator Only); Disable Sae (Administrator Only); Enable Sae On The Instrument And Specify The Sae Server; (Administrator Only) - Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual

Chapter 4 Use the instrument with the Security, Auditing, and E‑signature (SAE) v2.0 module

Enable SAE on the instrument and specify the SAE server

(administrator only)

Disable SAE (administrator only)

SeqStudio Genetic Analyzer Instrument and Software User Guide
™

Enable SAE on the instrument and specify the SAE server (administrator only)

This procedure requires a local administrator profile on the instrument and an SAE
administrator account in the SAE Administrator Console.
1. Sign in to the instrument with a local administrator profile.
2. Touch
Settings4SAE.
3. Touch Connection settings, then enter the Server IP and Port of the computer on
which the SAE Administrator Console is installed.
IMPORTANT! Specify a server with a static IP address.
4. Touch Enable SAE.
5. Enter your SAE administrator account username and password, then touch
Enable SAE.
This procedure requires a local administrator profile or an SAE administrator account.
• If you are signed in to the instrument as an SAE administrator:
a. In the home screen, touch
b. Enter your SAE administrator account username and password.
• If you are not signed in to the instrument:
a. If another user is signed in, touch
out.
Settings4SAE4Disable SAE.
in the home screen, then touch Sign
4
59