Direct Station Selection/Busy Lamp Field (Dss/Blf) Console; Busy Out Status Console; Do Not Disturb Console; Message Waiting Console - NEC NEAX2000 IVS2 General Description Manual

Chapter 5 Feature Description

Direct Station Selection/Busy Lamp Field (DSS/BLF) Console

Busy Out Status
Console
Do Not Disturb
Console
Message Waiting
Console
Room Cutoff
Console
Wake Up No
Answer Console
2
NEAX2000 IVS General Description
NDA-24293, Issue 2
This feature allows an EDW-48-2A unit associated with a Multiline Terminal to be
used as a Direct Station Selection/Busy Lamp Field (DSS/BLF) Console. When the
buttons on the EDW-48-2A unit are programmed for Direct Station Selection (DSS)
buttons, up to 60 stations can be directly accessed in addition to those already
appearing on the Multiline Terminal. Busy status for each station is indicated by a red
LED associated with each button. In addition, the DSS console can provide the
following functions:
• Message Waiting - Set/Cancel/Status Display
• Do Not Disturb - Set/Cancel/Status Display
• Automatic Wake Up No Answer - Status Display/Cancel
• Agent Busy Out - UCD - Status Display
• Line Lockout - Status Display
• Room Cutoff - Set/Cancel/Status
This feature allows an EDW-48-2A unit associated with a Multiline Terminal to be
used as a Busy Out Status Console. This feature is activated by use of a Function
Mode key on a DSS/BLF Console. Busy Out Status for each station is indicated by a
red LED associated with each button.
This feature allows an EDW-48-2A unit associated with a Multiline Terminal to be
used as a Do Not Disturb (DND) Console. This feature is activated by the use of a
Function Mode key on a DSS/BLF Console. DND set status for each station is
indicated by a green LED associated with each button. In addition, the Multiline
Terminal user can set/cancel the DND status of other stations using the DND Console.
This feature allows an EDW-48-2A unit associated with a Multiline Terminal to be
used as a Message Waiting (MW) Console. This feature is activated by the use of a
Function Mode key on a DSS/BLF Console. The Message Waiting status for each
station is indicated by a green LED associated with each button. In addition, the
Multiline Terminal user can set/reset MW status using the MW Console.
This feature allows an EDW-48-2A unit associated with a Multiline Terminal to be
used as a Room Cutoff Console. This feature is activated by the use of a Function
Mode key on a DSS/BLF Console. The Room Cutoff status for each station is
indicated by a green LED associated with each button. In addition, the Multiline
Terminal user can set/cancel Room Cutoff to another station using the Room Cutoff
Console.
This feature allows an EDW-48-2A unit associated with a Multiline Terminal to be
used as a Wake Up No Answer (WU) Console. This feature is activated by a function
mode key on a DSS/BLF Console. The No Answer status for each station is indicated
by a flashing green LED associated with each button.
Direct Station Selection/Busy Lamp Field (DSS/BLF) Console
Page 53