Dlp-B 148 Create Domain Icons; Dlp-B 149 Manage Domain Icons - Cisco ONS 15327 Procedure Manual

NTP-B202 Customize the CTC Network View
DLP-B148 Create Domain Icons
Purpose
Tools/Equipment
Prerequisite procedures
Required/As needed
Onsite/Remote
Security Level
All domain changes, such as added or removed nodes, are visible to all users who log into the network.
Note
From the View menu choose Go to Network View.
Step 1
Right-click the network map and choose Create New Domain from the shortcut menu.
Step 2
When the domain icon appears on the map, click the map name and type the domain name.
Step 3
Step 4 Press Enter.
Step 5 Return to your originating procedure (NTP).
DLP-B149 Manage Domain Icons
Purpose
Tools/Equipment
Prerequisite procedures
Required/As needed
Onsite/Remote
Security Level
All domain actions, such as adding or removing node icons, will be seen by all users who log into the
Note
network.
From the View menu choose Go to Network View.
Step 1
Locate the domain action you want in
Step 2
Cisco ONS 15327 Procedure Guide, R4.0
9-10
Use this task to create a domain icon to group ONS 15327 icons in CTC
network view.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
Use this task to manage CTC network view domain icons.
None
DLP-B60 Log into CTC, page 2-23
DLP-B148 Create Domain Icons, page 9-10
As needed
Onsite or remote
Provisioning or higher
Table 9-1 and complete the appropriate steps.
Chapter 9 Change Node Settings
March 2003