Dlp-B144 Disable The Open Shortest Path First Protocol; Ntp-B202 Customize The Ctc Network View - Cisco ONS 15327 Procedure Manual

Chapter 9 Change Node Settings

DLP-B144 Disable the Open Shortest Path First Protocol

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Network > OSPF tabs. The OSPF subtab has several options.
Step 1
Step 2 In the OSPF on LAN area, uncheck the OSPF active on LAN check box.
Click Apply. Confirm that the changes appear; if not, repeat the task.
Step 3
Return to your originating procedure (NTP).
Step 4
Note

NTP-B202 Customize the CTC Network View

Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As needed
Onsite/Remote
Security Level
Step 1 Complete the
Step 2.
Step 2 Complete the following tasks, as needed:
•
•
•
•
•
March 2003
Use this task to disable the Open Shortest Path First (OSPF) routing
protocol for an ONS 15327 LAN.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
Disabling OSPF can cause an XTC reboot, which causes a temporary loss of connectivity to the
node, but does not affect traffic.
Use this procedure to modify the CTC network view, including grouping
nodes into domains for a less-cluttered display, changing the network view
background color, and using a custom image for the network view
background.
None
As needed
Onsite or remote
Provisioning or higher
"DLP-B60 Log into CTC" task on page
DLP-B145 Change the Network View Background Color, page 9-8
DLP-B267 Change the Default Network View Background Map, page 9-8
DLP-B268 Apply a Custom Network View Background Map, page 9-9
DLP-B148 Create Domain Icons, page 9-10
DLP-B149 Manage Domain Icons, page 9-10
NTP-B202 Customize the CTC Network View
2-23. If you are already logged in, continue with
Cisco ONS 15327 Procedure Guide, R4.0
9-7