Overview; Compliance Standards; Cisco Ncs 2002 Shelf; Chapter - Cisco NCS 2006 Hardware Installation Manual

Overview

This chapter provides an overview of the Cisco NCS 2002, NCS 2006, and NCS 2015 shelf install.
The Cisco NCS shelf assemblies are intended for use with telecommunications equipment only.
Note
The sections are:
•
•
•
•

Compliance Standards

Install the NCS 2002, NCS 2006, and NCS 2015 shelves in compliance with your local and national electrical
codes:
• United States: National Fire Protection Association (NFPA) 70; United States National Electrical Code.
• Canada: Canadian Electrical Code, Part I, CSA C22.1.
• Other countries: If local and national electrical codes, are not available, refer to IEC 364, Part 1 through

Cisco NCS 2002 Shelf

The NCS 2002 is designed to comply with Telcordia GR-1089-CORE, Issue 5. The NCS 2002 provides only
Type 2 and Type 4 interfaces. A single NCS 2002 shelf supports both ANSI and ETSI standards.
The NCS 2002 is Federal Information Processing Standard (FIPS) 140-2 and Common Criteria (CC) compliant.
The NCS 2002 shelf has 3 horizontal card slots —Slot 1, Slot 2, and Slot 3. While Slot 2 and Slot 3 house
MSTP cards that provide 10 to 100 Gbps interconnections, Slot 1 accommodates the TNC, TNCE, TSC, or
TSCE card (timing and control card). The NCS 2002 system can be powered by AC or DC power module.
Compliance Standards, page 1
Cisco NCS 2002 Shelf, page 1
Cisco NCS 2006 Shelf, page 3
Cisco NCS 2015 Shelf, page 4
Part 7.
1
C H A P T E R
Cisco NCS 2000 Series Hardware Installation Guide
1