Table 75. 16-Bit Nand Flash; Table 76. 16-Bit Pc Card - STMicroelectronics RM0365 Reference Manual

Flexible static memory controller (FSMC)
16-bit NAND Flash memory
FMC signal name
NOE(= NRE)
NWAIT/INT[3:2]
Theoretically, there is no capacity limitation as the FMC can manage as many address
cycles as needed.
FMC signal name
A[10:0]
NIORD
NIOWR
NREG
D[15:0]
NCE4_1
NCE4_2
NOE
NWE
NWAIT
INTR
271/1080
I/O
A[17] O
A[16] O
D[15:0] I/O
NCE[x] O
O
NWE O
I
I/O
O Address bus
O Output enable for I/O space
O Write enable for I/O space
O Register signal indicating if access is in Common or Attribute space
I/O Bidirectional databus
O Chip Select 1
O Chip Select 2 (indicates if access is 16-bit or 8-bit)
O Output enable in Common and in Attribute space
O Write enable in Common and in Attribute space
I PC Card wait input signal to the FMC (memory signal name IORDY)
PC Card interrupt to the FMC (only for PC Cards that can generate
I
an interrupt)
PC Card presence detection. Active high. If an access is performed
CD I to the PC Card banks while CD is low, an AHB error is generated.
Refer to
DocID025202 Rev 7

Table 75. 16-bit NAND Flash

NAND Flash address latch enable (ALE) signal
NAND Flash command latch enable (CLE) signal
16-bit multiplexed, bidirectional address/data bus
Chip Select, x = 2, 3
Output enable (memory signal name: read enable, NRE)
Write enable
NAND Flash ready/busy input signal to the FMC

Table 76. 16-bit PC Card

Section 14.3: AHB interface
Function
Function
RM0365