Table 140. I2C-Smbus Specification Clock Timings - STMicroelectronics RM0365 Reference Manual

RM0365
Symbol
SCL clock frequency
f
SCL
Hold time (repeated) START
t
HD:STA
condition
Set-up time for a repeated
t
SU:STA
START condition
Set-up time for STOP condition
t
SU:STO
Bus free time between a
t
BUF
STOP and START condition
Low period of the SCL clock
t
LOW
Period of the SCL clock
t
HIGH
Rise time of both SDA and
t
r
SCL signals
Fall time of both SDA and SCL
t
f
signals
Note: SCLL is also used to generate the
SCLH is also used to generate the
Refer to
I2C_TIMINGR settings vs. I2CCLK frequency.
Master communication initialization (address phase)
In order to initiate the communication, the user must program the following parameters for
the addressed slave in the I2C_CR2 register:
•
Addressing mode (7-bit or 10-bit): ADD10
•
Slave address to be sent: SADD[9:0]
•
Transfer direction: RD_WRN
•
In case of 10-bit address read: HEAD10R bit. HEAD10R must be configure to indicate
if the complete address sequence must be sent, or only the header in case of a
direction change.
•
The number of bytes to be transferred: NBYTES[7:0]. If the number of bytes is equal to
or greater than 255 bytes, NBYTES[7:0] must initially be filled with 0xFF.
The user must then set the START bit in I2C_CR2 register. Changing all the above bits is
not allowed when START bit is set.
Then the master automatically sends the START condition followed by the slave address as
soon as it detects that the bus is free (BUSY = 0) and after a delay of t
In case of an arbitration loss, the master automatically switches back to slave mode and can
acknowledge its own address if it is addressed as a slave.
2
Table 140. I C-SMBUS specification clock timings
Parameter
Section 28.4.9: I2C_TIMINGR register configuration examples
Standard- Fast-mode
mode (Sm) (Fm)
Min Max Min
- 100 -
4.0 - 0.6
4.7 - 0.6
4.0 - 0.6
4.7 - 1.3
4.7 - 1.3
4.0 - 0.6
- 1000 -
- 300 -
t and t timings.
BUF SU:STA
t and t
HD:STA SU:STO
DocID025202 Rev 7
Inter-integrated circuit (I2C) interface
Fast-mode
SMBUS
Plus (Fm+)
Max Min Max Min
400 - 1000 -
- 0.26 - 4.0
- 0.26 - 4.7
- 0.26 - 4.0
- 0.5 - 4.7
- 0.5 - 4.7
- 0.26 - 4.0
300 - 120 -
300 - 120 -
timings.
for examples of
BUF
Unit
Max
100 kHz
- µs
- µs
- µs
- µs
- µs
50 µs
1000 ns
300 ns
.
788/1080
834