Option Devices For The Respective Connection; 1Communication Module - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

1.3

Option Devices for the Respective Connection

The following shows the option devices to connect in the respective connection type.
For the specifications, usage and connecting procedure on option devices, refer to the respective device manual.
1.3.1
Communication module
Product name
Bus connection unit
Serial communication unit
MELSECNET/H communication unit
MELSECNET/10 communication unit
CC-Link IE Controller
Network communication unit
CC-Link IE Field
Network communication unit
CC-Link communication unit
Ethernet communication unit
*1
Wireless LAN communication unit
*1
Data transfer in wireless LAN communication may not be as stable as that in cable communication.
A packet loss may occur depending on the surrounding environment and the installation location.
Be sure to perform a confirmation of operation before using this product.
*2
When a wireless LAN configuration of GT Designer3 the [Operation Mode] is set to [access point], the maximum connection
number is a five (recommended).
*3
The product with hardware version A or later (manufactured in December 2013) complies with the regulation.
The product with hardware version A can be used only in Japan.
*4
The product with hardware version B or later (manufactured from October 2014) complies with the regulation.
The product with hardware version B or later can be used in Japan, the United States, the EU member states, Switzerland,
Norway, Iceland, and Liechtenstein.
*5
The product with hardware version D or later (manufactured from May 2016) complies with the regulation.
The product with hardware version D or later can be used in Japan, the United States, the EU member states, Switzerland,
Norway, Iceland, Liechtenstein, China (excluding Hong Kong, Macao, and Taiwan), and South Korea.
*6
The product complies with the RE Directive from March 31, 2017.
Model
For QCPU (Q mode), motion controller CPU (Q series)
GT15-QBUS
Bus connection (1ch) unit standard model
For QCPU (Q mode), motion controller CPU (Q series)
GT15-QBUS2
Bus connection (2ch) unit standard model
For A/QnACPU, motion controller CPU (A series)
GT15-ABUS
Bus connection (1ch) unit standard model
For A/QnACPU, motion controller CPU (A series)
GT15-ABUS2
Bus connection (2ch) unit standard model
For QCPU (Q mode), motion controller CPU (Q series)
GT15-75QBUSL
Bus connection (1ch) unit slim model
For QCPU (Q mode), motion controller CPU (Q series)
GT15-75QBUS2L
Bus connection (2ch) unit slim model
For A/QnACPU, motion controller CPU (A series)
GT15-75ABUSL
Bus connection (1ch) unit slim model
For A/QnACPU, motion controller CPU (A series)
GT15-75ABUS2L
Bus connection (1ch) unit slim model
GT15-RS2-9P
RS-232 serial communication unit (D-sub 9-pin (male))
GT15-RS4-9S
RS-422/485 serial communication unit (D-sub 9-pin (female))
GT15-RS4-TE
RS-422/485 serial communication unit (terminal block)
GT15-J71LP23-25
Optical loop unit
GT15-J71BR13
Coaxial bus unit
Optical loop unit
GT15-J71LP23-25
(MELSECNET/H communication unit used in the MNET/10 mode)
Coaxial bus unit
GT15-J71BR13
(MELSECNET/H communication unit used in the MNET/10 mode)
GT15-J71GP23-SX
Optical loop unit
GT15-J71GF13-T2
CC-Link IE Field Network (1000BASE-T) unit
GT15-J61BT13
Intelligent device station unit CC-LINK Ver. 2 compatible
GT25-J71E71-100
Ethernet (100Base-TX) unit
• Used for the connection to the IEEE802.11b/g/n compliant, built-in antenna,
access point (master unit)
GT25-WLAN
and smartphones.
• Compliance with
Japan Radio Law
1.3 Option Devices for the Respective Connection
Specifications
*2
, station (slave unit), personal computers, tablets,
*3
*4
*6
*4
*5
, FCC
, RE
(R&TTE
), SRRC
, KC
1
*5
1 - 21

Advertisement

Table of Contents
loading

Table of Contents