MCi iControl User Manual page 85

Caution
Before connecting the "System" ethernet cable to the iBox:
1. Verify that the Car ID, in the upper right corner of the iBox display, is correct. Press the
iBox "Computer Reset" button and when the display returns, verify that Car ID is still
correct. The Car identifier is set on the iView > Controller > Configuration > General tab
(see "Configuration - General" on page
2. Verify that no other iBox in this group of controllers has the same Car ID (see Figure
2.8).
3. Check the "Alternate Dispatcher" settings on the iView > System > System Configura-
tion > Building tab
select Preference Order" settings are identical on every car in this group of controllers
(see Figure 2.8).
Figure 2.8 Check before connecting the "System" ethernet cable to the iBox
Check for correct Car ID. Verify that no two Car IDs in the group are the same.
@003 015 FG RO
LOCAL DISPATCHER
2:26:22AM
10/30/2007
Car
On the iView > System > System Configuration > Building tab, verify that the Alternate
Dispatcher "Auto-select Preference Order" settings are identical for all cars in the group.
Car 01 System Configuration
(see "System Configuration tab" on page
L01
@003 015
Passenger
Ofpm
Mgmt
Car
Car 02 System Configuration
Setting Initial Operating Parameters
9-95).
10-6). Verify that the "Auto-
FG RO L02 @003
Passenger
Ofpm
2:26:22AM
10/30/2007
Mgmt Car
Car 03 System Configuration
015 FG RO L03
Ofpm
2:26:22AM
10/30/2007
Mgmt
2-31
2