Serial Cop Installation - MCi iControl User Manual

Serial COP Installation

1. Mount the Serial COP boards in the car operating panel (recommended orientation:
"Serial COP board - typical installation" on page 5-48.
Please refer to "ICE-COP Board Mounting Dimensions (not to scale)" on page
2. Connect the COP switches and lamps to the Serial COP board(s) using the plugable con-
nectors. Refer to job print drawings - Cartop Details (-CTx).
3. Verify the COP board I/O assignments using the iView Configuration > I/O Boards >
Configuration tab.
ICE-COP Board Diagnostics
the ICE-COP board provide diagnostic information.
ing Panel Board QR" on page
The DIP switches and LEDs in the upper right corner of
Please refer to "ICE-COP Serial Car Operat-
6-83.
Serial COP
Drilling dimensions are provided.
see
5-52.
5
5-51