System Configuration Tab - MCi iControl User Manual

iView - System View

System Configuration tab

The System Configuration tab is used to program the dispatching parameters for a Simplex car,
Swing car, or AGC (Local Dispatcher). This tab provides access to controls affecting dispatch-
ing, parking, operational modes, etc.
10-6 Manual # 42-02-2222
Through the tree on the left side of this tab, you can access:
• Building: Set the highest floor served, number of cars, floor
and car labels, etc. (see page
• CFSS: Set recall-to-floor eligibility when operating in a Com-
mandeer for Special Service mode
• Dispatching: General dispatching controls
• Hall Call Eligibility: On a per-floor, per-configuration basis
(1 — 8), select the hall calls to which the car(s) may respond
(see page 10-13).
• Mode of Operation: Setup the dispatching mode of opera-
tion parameters and configurations
• Parking: Set parking options and floors for Parking configu-
rations (see page 10-20).
• Parking Eligibility: On per-configuration basis (1 — 8), set
the parking eligibility parameters for the car
• Split Bank: Split Bank operation is available only on the
Central Dispatcher (see page
• Management: Provides access to the following:
• Remote Monitoring Authorization: Use to authorize a
third party remote monitoring tool to connect to iControl
(see page 10-31).
• Local Dispatcher: Use to force the system to resend the
system parameters to all connected cars
10-7).
(see page 10-9).
(see page
(see page 10-14).
(see page
10-29).
(see page
10-11).
10-27).
10-32).