Lcd Display And Keypad - MCi iControl User Manual

iControl Description

LCD Display and Keypad

The iBox LCD display and keypad allow you to:
• View the status of inputs and outputs
• View and change limited parameter settings
• View and register calls
• View error messages and the system event log
Typically, when you need to view or change system parameters in an iControl, you connect to
the iBox through the PC or LAN Ethernet port and use the iView graphical user interface run-
ning on a Windows OS PC to easily access, view, or edit any desired parameter.
However, during initial system setup, parameters that allow PC access to your system can be
directly accessed and edited through the keypad and LCD display located on the front panel of
every iBox. (For detailed information about keypad parameter entry, please refer to
Figure 1.4 iBox Data Entry Keypad and LCD Display
1-8 Manual # 42-02-2222
@040 001 F R L01
Passenger
0fpm
6:15:09AM
11/30/2003
Car
1 2 3
ENTER
COMPUTER
RESET
FAULT
RESET
4
Section
LCD Display
Softkeys
Directional Arrows /
Value Incrementers
Select Parameter /
Enter Value
Move Cursor
7.)