Timer Details - MCi iControl User Manual

iView - Controller View

Timer Details

When a timer is selected in the table, details of its settings appear in Timer Details. (You must
select a timer and click Edit to change settings. This display is read only.)
Timers
Timers are displayed in the Timers list. If timers overlap (manage the same period of time), the
timer appearing higher in the list will have priority (control). To move a timer within the list,
click to select it, then click Move Up or Move Down.
Add a Timer
1. Click Add. The Add/Edit Timer dialog is displayed.
2. From the Configurations list, select the configuration(s) and/or feature(s) that should
be active when this timer is valid (timer day and time are the present day and time).
3. Select the repeat frequency (Recurrence type) of the timer:
• Daily: This timer is active every day during the specified time period.
• Weekly (Day of the week): This timer is active each week on the specified day or days
(i.e., Mondays or Mondays and Tuesdays) or can be set to span days (i.e., Monday
through Wednesday).
• Monthly (Day of week): This timer is active each month on the specified week days
(i.e., first Monday, third Sunday, etc.) or can be set to span days (i.e., second Sunday
through third Saturday, etc.).
9-136 Manual # 42-02-2222
To add a new timer to the list:
Controls in this area
change depending on the
Recurrence type selected